-40%
10.5mm Conversion Bushings for Vintage Style Tuners Tuning Machines Set Gold
$ 3.14
- Description
- Size Guide
Description
Press-fit brass conversion bushings let you install vintage style tuning machines with 6mm diameter string posts into newer guitars initially equipped with sealed modern style tuners that have oversized 10.5mm holes.Peghead holes size vary by manufacturer so please measure your pegholes before ordering. We also offer smaller 10.2mm bushings for 10mm holes
Great for retrofitting vintage-style tuners — no need to plug and redrill the peghead.
Nickel finish complements vintage hardware. Set of 6.
Set of 6, 10.5mm Conversion Bushings
Inside Diameter: 6.1mm
Outside Diameter: 10.8mm
Top Diameter: 12.94mm
Total Height: 9.71mm
Gold finish
10.5mm (27/64")-diameter holes required
Important Installation Note
Our conversion bushings work with most vintage Kluson style machine heads, including Wilkinson.
However these will not fit Genuine Vintage Kluson machine heads. Genuine Klusons use a 6.2mm post and will require our bushings to be opened up slightly with a reamer or drill bit
Gotoh SD90 & SD91 tuners with standard posts have post diameters of 6.65mm. These bushings will not fit these tuners.