-40%

220V 300W 100mm Leadfree Solder Pot Soldering Desoldering Bath Titanium Plate

$ 20.35

Availability: 55 in stock
  • Condition: New
  • Brand: Unbranded

    Description

    Description:
    Solder Pot has the advantages of small size, easy placement, large temperature adjustment range, automatic constant temperature, high accuracy, low power consumption, energy saving, rapid heating, and long service life. It is widely used in , coil pin tin plating, electronic , electronic wire production, etc.
    Features:
    1. Electronic temperature control plate, adjustable temperature and automatic constant temperature.
    2. Easy to use and maintain, excellent heat effects.
    3. The furnace is made of high quality stainless steel plate, heatproof, solid and durable.
    4. The temperature can reach up to 450℃, quickly melting tin.
    5. Widely used in , coil pin tin plating, electronic , electronic wire   production, etc.
    Specifications:
    Material: Stainless steel + titanium plate
    Input Voltage: AC110V/220V  60Hz
    Plug Type: US plug, AU plug(Optional)
    Power: 300W
    Temperature Range: 200℃-450℃
    Melting Time: Approx. 8 minutes
    Capacity: 800g
    Slot Diameter: 100mm/3.94in
    Package Includes:
    1 x Solder Pot
    Note:
    1. This product must be grounded. Improper installation of the grounding must be prohibited.
    2. Position the control dial to high range when you start to use the solder pot, and then place the dial to the grade of auto-temperature after soldering.
    3. The general working temperature of molten solder in the solder pot is 300-350℃ (around grade 4-grade 9). The temperature of melted solder shouldn't be too high, or it will cause the aging of solder pot, the darkening or yellowing of melted solder.
    4. When highly acidic scaling powder is applied, the solder pot is more likely to be corroded or perforated under extraordinarily high temperature.
    5. The power must be turned off before leaving to avoid accidents.
    FDA declaration :
    Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item
    This item has been cleaned and treated according to the manufacturer's instructions.
    The Fingertip Pulse Oximeter is certified with the US FDA 510K No. K070371, the CE & TUV of Eureope and it is on the Australian Register of Therapeutic Goods(ARTG) with the code 136606.
    The Powered Surgical Instrument / Speed 808 System is certified with the US FDA 510(k) Number:K132989
    The Powered Surgical Instrument / Hair Remove Device is certified with the US FDA 510(k) Number:K180353
    The Powered Surgical Instrument / Hair Remove System is certified with the US FDA 510(k) Number:K141973
    massager, vacuum, light induced heating / Slimming Treatment Device is certified with the US FDA 510(k) Number:K161892