CM181 LEAD-FREE Titanium Alloy SOLDERING POT Solder Melting 1200W 110V / 220V

Description

CM181 LEAD-FREE Titanium Alloy SOLDERING POT Solder Melting 1200W (Can be modified: 110V / 220V)
SPECIFICATIONS
1, welding the larger, apply to small and medium-sized circuit board of the Baptist tin work.
2, power, heating up fast, rapid temperature compensation, apply to unleaded corresponding welding.
3, tin pot imported 2 mm metal made of titanium, high temperatures, strong anti-corrosive.
4, control of part of a microcomputer chip control and accurate temperature fluctuations small.
5, a dormant standby function can be extended by fever and tin-pot life.
6, with failure alerts.
7, a keypad lock function to prevent the misuse conditioning temperature settings.
8, a closed touch switches, easy to operate.
CM181 DESK
QUADRATURE
CM181DESK QUADRATE
Technical parameters
POWER
RANGE
TIN CAPACITY
1200W
200-600℃
8.2kg
WHOLE SIZEmm
3
POT SIZEmm
3
446L x 245W x 115H
180 x 140 x 45
Precautions
Melting tin furnace work must be placed in a stable, heat-resistant work platform to prevent high-temperature tin from the tin pot spill. Has been melting tin and tin furnace overall temperature is higher, to be careful work, beware of burns.
When the tin furnace is used for the first time, please do not empty the tin pot to cause the tin oxide to oxidize too fast, please add the small tin or the partially dissolved tin to guarantee the prompt heat transfer.
Lead-free melting furnace must work with a lead-free stove placed separately (including all lead-containing items), to prevent lead pollution, lead-free tin lead-free lead, resulting in product failure. In this regard, the Company makes a serious statement that the Company will not be held responsible for any such occurrence.
Prohibit the use of tin melting furnace in the vicinity of combustible gases and flammable and explosive materials.
Mobile tin melting furnace, you must first cut off the power, until the tin furnace to room temperature when cooled again.
This product is a high-temperature equipment, do not use when you remember to cut off the power to avoid accidents.
For tin furnace safety and service life, tin furnace continuous work not more than 12 hours.
In order to personal safety and the machine can work properly, remember not to empty burning, the use of access to a "ground" of the power supply, and pay attention to "ground" can not be connected to the "zero line".
The company's melting furnace stove with titanium imported from Japan TAI refined materials, high-temperature burning for a time after the pot pot body surface will become golden or blue, which is a normal phenomenon, but also the material properties of this metal.
The quality of this product is guaranteed in all parts are used under the conditions of the original brand accessories, or quality is not guaranteed.
Customers in use, cooking acid, alkali, tin slag and other strong corrosive materials, the tin pot and the heating element is not guaranteed.
The tin stove is not waterproof products, in the use of attention to moisture.
2, the performance characteristics:
1, Cm series of lead-free solder pot configuration of high-power heating core, can quickly dissolve the lead-free solder bar, from room temperature to 450 ℃, only 25 minutes (according to tin furnace volume size will be slightly different).
2, the use of microcomputer chip intelligent control, dual digital display, intuitive clear, high thermal sensitivity, rapid return to temperature, temperature compensation fast.
3, lead-free tin pot made of imported titanium material, high temperature, corrosion-resistant, wear and durable.
4, the stove set data using touch buttons directly input, simple and accurate.
5, the machine set the data can be long-term preservation, not shutdown, power failure.
3, the working environment:
1, the working voltage: AC220 ± 10V (can be customized 110V)
2, the operating temperature: 0-55 degrees
3, the working temperature: <90% RH no condensation
4, the operating method and function settings:
1, the temperature setting:
(1), open the tin furnace power switch, the operation panel will display the temperature measurement value of 3.0.0 temperature setting 2.8.0.0., Directly use the plus or minus - key to adjust the temperature setting, click + Key will rise or fall a unit, long press + or minus - - key to continuously rise or fall, the set temperature value after setting two seconds automatically long-term preservation, not by the switch machine, power failure.
(2), open the tin furnace power, the operation panel will display the temperature measurement value of 3.0.0 temperature setting value of 2.8.0.0., Use the shift key type * to adjust the temperature set point, the decimal point behind which number, you can Use the + or - keys to adjust this number. The set temperature value is automatically stored for two seconds after setting. It is not influenced by switch machine or power failure.
2, microcomputer self-tuning:
If the deviation between temperature measurement and temperature setting is too high (3-5 degrees), or temperature measurement and actual temperature deviation is too high (10-20 degrees). Please auto-tuning operation, press the shift key * Hold for three seconds automatically enter the self-tuning temperature controller, display AT and set temperature, and the two subtitles will stop flashing cross, direct 20 minutes -40 minutes At the end of auto tuning, the temperature value you set will be displayed normally. If auto tuning is not finished, press and hold the shift key for a long time to stop. Factory parameter values ​​for the optimal value, generally do not self-tuning.
2, the temperature compensation:
If the temperature measurement and the furnace after the actual temperature after autotuning or bias is too high, you can use the following method correction.
(1), hold down the CAL function key for two seconds, display the temperature measurement value 5c temperature setting 0.0 At this time can press the + - key to compensate. After the compensation is completed, press the CAL soft key twice to save and exit.
Example: When the measured temperature is 10 ° C higher than the actual temperature in the furnace, use the minus key to adjust the temperature measurement value 5c to the temperature setting value -10, and then press the function key CAL to save and exit. On the contrary, the measured temperature is lower than the actual temperature of the furnace 10 degrees, with + key to adjust the temperature measurement value 5c temperature setting 10, and then press the function key CAL to save and exit.
(2), the factory parameter values. Press and hold the CAL softkey for two seconds to display 5c 0.0, and then press the function key
CAL display Loc c, and then press the function key CAL to restore the normal window, 5c said compensation value.
Loc represents a lock, meaning unlock.
3, Note:
(1), self-tuning, other parameters can not be adjusted. , & Lt;
(2), self-tuning takes 20-40 minutes, since the end of the self-tuning also need 10-20 minutes after the stabilization process, during which time the temperature fluctuation is normal.
5, fault detection
1, boot does not power, check the fuse is open, or plug is plugged.
2, after the boot temperature display the same, do not heat up, said heating element disconnected.
3, if the left display after the boot display temperature is very high, the right display shows HIA or ORA and has been flashing, then the thermo-couple open, or temperature control table failure.
6, packing list
This product package of equipment list is as follows:
1, CM181 Tin furnace x 1 unit
2, the use of a manual
3, a warranty card
4, one copy of the certificate
5, a dross scraper (except for customized models)
6, the insurance tube II only
Payment
Shipping
We accept Paypal, credit card through Paypal. Buyer may need to pay for import tax depend on your country's custom. You can ask us for more detail.
We ship to international and item will be shipped by airmail from HongKong.
Items are shipped within 2-3 business day after receive cleared payment.
An additional
USD8
for insurance
Most item will arrive within 8-14 business days. It depend on your location. In some case, ship to some countries will take over 3 weeks, especially  brazil, Italy and France .