CM310A 220V 300W 3 15/16in Stainless Steel Solder Furnace Melting Soldering Pot

Description

Store Categories
Store Categories
Other
CM310A 220V 300W 100MM Stainless Steel Solder Furnace Melting Soldering Pot
Details
Description:
CM310A 220V 300W 100MM Stainless Steel Solder Furnace Melting Soldering Pot
Features:
100% brand new, more reliable and practical.
Easy to use, thermal effects, tin melting fast
Initial use tin stove, electric core of a small amount of smoke is normal
Using high quality stainless steel solder pot, with a high temperature, acid, abrasion resistance, non-stick tin, tin oxide surface less so; tin less, less power consumption, energy saving, long life
Effective insulation technology to shorten the melting of tin time, improve thermal efficiency, reduce energy consumption
New electronic thermostat circuit design, the working temperature from 200-480 °.
Specification:
Color: as the picture show
Material: stainless steel
Weight: 1092g
Tin pan diameter:
Φ100mm
Capacity: 1200g
Molten solder time: about 8 minutes
Input voltage:
AC220V
, 50Hz
Power:
300W
Note:
This product must be grounded. Improper installation of the grounding must be prohibited.
Position the control dial to high range when you start to use the solder pot, and then place the dial to the grade of auto-temperature after soldering. The general working temperature of molten solder in the solder pot is 300-350 ℃ (around grade 4-grade 9). The temperature of melted solder shouldn't be too high, or it will cause the aging of solder pot, the darkening or yellowing of melted solder. When highly acidic scaling powder is applied, the solder pot is more likely to be corroded or perforated under extraordinarily high temperature.
Package includes:
1 x Solder furnace
(
included Adapter
)
Details pictures:
Thank you
Thank you
© 2019, All rights reserved
Using high quality stainless steel solder pot, with a high temperature, acid, abrasion resistance, non-stick tin, tin oxide surface less so; tin less, less power consumption, energy saving, long life Effective insulation technology to shorten the melting of tin time, improve thermal efficiency, reduce energy consumption Position the control dial to high range when you start to use the solder pot, and then place the dial to the grade of auto-temperature after soldering. The general working temperature of molten solder in the solder pot is 300-350 ℃ (around grade 4-grade 9). The temperature of melted solder shouldn't be too high, or it will cause the aging of solder pot, the darkening or yellowing of melted solder. When highly acidic scaling powder is applied, the