New IR Preheating Oven T8280 High-power Preheating Station for PCB SMD BGA

Description

<IMG border=0 src="https://ti2.auctiva.com/web/aswCredit.gif"><BR><A href="https://www.auctiva.com/?how=scLnk0" _blank><IMG border=0 src="https://ti2.auctiva.com/images/sc1line0.gif"></A>
New IR Preheating Oven T8280 High-power Preheating Station for PCB SMD BGA
Products Features：
1. T-8280 can achieve to heat PCB board and component which contains lead or not,especially for the BGA and SMD parts.
2. Easily operate, you can operate it through easy training.
3. This machine selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely.
4. This machine has 600W heating system, widely to 280x270mm.Can use together with the handhold infrared welder T-835.
5. Use infrared heat, easy to cut through, heat proportion, dont have sirocco flow. Dont shift the small components on the PCB board,ensure the welding quality.
Technical Parameter:
Work bench size
410x316mm
Rated voltage and frequency
AC220-230v/AC110V   60/50Hz
Complete machine power
1600W
Preheating plate power
1500W
Preheating plate size
280x270mm
Preheating plate temperature adjustable
0-450
℃
Main Components:
Preheating plate main body
1
Temperature sensor
1
PCB board holder
1
Power line
1
User manual (compact disc)
1
Main component function explanation
：
Operation instructions
：
1. Inspect the machine and then open it
①
Check the connection of the power line.
②
Turn on the power switch. Allow the T-8280 Power-On-Self-Test (POST) to complete. After this, Temperature set-points will display last value used.
③
The black switch on the front panel are used to control the infrared preheating plate; press the blue button “
▲
”(up)
，
the red button“
▼
”(down), can adjust the infrared preheating plate temperature between
0
℃
and 450
℃
. Press the button“ON”
，
the infrared preheating plate starts to work, press“OFF”
，
it stops working.
2. Operation of preheating PCB board
(1) The placement and adjustment of the PCB board
：
①
According to the size of the PCB board, adjust the PCB board holder, then put the PCB board and fix the adjust knob.
②
According to the size of PCB board and welding technological requirement, press the blue button “
▲
”
(up)and the red button  “
▼
” (down), regulate the output temperature of preheating plate between
0
℃
and 450
℃
(2) Preheating open and close:
①
Press the “ON” button
，
open the preheating plate about 3-5 minutes, make the temperature be the setting value then carry on the next step .
②
Finishing, press “OFF”, the preheating plate stops working.
Attention
：
Don’t close the power switch until the machine full cooling.
③
The preheating temperature set: If the PCB board contains lead, adjust the infrared preheating plate temperature to 100-120
℃
; if not, adjust to 120-140
℃
. You can also set the preheating temperature according to the user’s experience and technology.
3. Machine installation and adjustment:
The preheating plate heating type includes: the total pressure flow-through heating way and the PID percentage adjustment way. You can adjust it according to the preheating allowance. Generally speaking, if the preheating temperature is lower than 250
℃
, selects the PID percentage adjustment method; and if the preheating temperature is higher than 250
℃
, use the total pressure flow-through heating way.
Adjustment method
：
1. Press “
▲
”power-on, display: C=?
2. Press “
▲
”choose 0 or 1,every press the status c
hange one time,
C=0 is PID percentage adjustment, C=1 is switching control.
3. Press “
▼
”OK
Cautions!
1. The high temperature operation, pay attention, avoid scalding.
2. After finishing, don’t turn off the power immediately; make sure the infrared preheating plate complete cooling.
3. If you don’t use the machine for a long time, you’d better pull off the power source plug!
4. Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly!
Payment
PayPal is our preferred method of payment. Your
PayPal account must be a Verified PayPal account. When paying through PayPal, it is best to select immediate payment. If you select eCheck, it may take 2-8 days to clear PayPal.
Shipping
1. We ship this item within 1-4 working days after receive the money;
2. Please
leave us your phone number for fast and smooth delivery.
3. We can ship this items to all countries. But if you are in exclude locations, please contact us for calculating the shipping cost.
Return policy
1. If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact us before you return it.
2. If your item is defective in 14 days, We will send you a replacement without extra charger, or refund your money after we receive the defective item.
3. If your item is defective after 14 days, you can still send it back to us. We will send you a new one after receiving the defective item. But you need to pay the return shipping fee
Contact us & Feedback
1. Our price (sale & shipping price) does not include any taxes, VAT and other hidden charges.
2. We will usually declare the package as sample at lower value to help you reduce or avoid some custom troubles and fees.
Actually It is depends on your local customs
3. If you need some information about the product
, please contact us. We will attach it via Email.
4.
If you have a satisfied purchase with us, please give us a positive
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
<div style="text-align:center"><a style="text-decoration:none" href="https://mostpopular.sellathon.com/?id=AC1366984"><img src="https://www.sellathon.com/Resources/Images/countercredit.gif" border="0"></a></div>