Sealevel SeaLink.Ultra 4103 Ethernet to 1-Prt RS-232,RS-422,RS-485 Serial Server

Description

This is for 1 device in lightly used condition.  See photo for example.
Description
Sealevel’s 4103 Ethernet to serial server is the easiest way to connect a single RS-232, RS-422, or RS-485 serial
port
to your Ethernet network. The 4103 also includes a Reed
relay
output and an optically isolated input to allow remote control and monitoring of real world devices. SeaLINK® products use industry standard RFC 2217 TCP/IP protocol for maximizing compatibility with the widest range of applications and devices.
Sealevel’s
SeaLINK
software
drivers
and utilities make installation and operation easy using Microsoft Windows operating systems. After software installation, the 4103’s serial
ports
appear as virtual
COM
ports
to the host machine. Standard serial operating calls are transparently redirected to the 4103, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. Serial tunneling is also supported, allowing two native serial devices to communicate over a network. Alternatively, raw data socket mode is supported, eliminating the need for a driver.
To simplify installation and configuration, a printed copy of the
SeaLINK QuickStart Guide
is included with all Ethernet serial server orders.
Additional information
Family
SeaLINK
Digital I/O
Isolated Inputs
,
Reed Relay Outputs
Dimensions
4.5 (L) x 4.2 (W) x 1.1 (H)
Electrical Interface
RS-232
,
RS-422
,
RS-485
Humidity Range
10 – 90% Relative Humidity, Non-Condensing
Host Interface(s)
Ethernet
Max Data Distance
4000 feet
Max Data Rate
230.4K bps
Optically Isolated
Yes
Operating Temperature
0 – +70C
# of Ports
1
Power Requirement
9-30 VDC @ 3.25W
Serial Connector(s)
DB9M
Storage Temperature
-50 – +105C