Solder Pot Bath 300W Lead-Free Titanium Alloy Round Soldering Irons 100mm CM310

Description

Store category
Sign Up Now !
You may also like
Solder Pot Bath 300W Lead-Free Titanium Alloy Round Soldering Irons 100mm CM310
Product Description
Solder Pot Bath CM310 300W Lead-Free Titanium Alloy Round Soldering Irons
please select the voltage 110v or 220v you need, or we'll select one for you according to your country.
Rated power 300W
Temperature range 50-480℃
Melting tin quantity 2.2kg
Frequency 50-60Hz
(mm)Tin pot diameter 100
1, the working voltage: AC220 ± 10V (can be customized 110V)
2, Operating temperature: 0-55 degrees
3, the working temperature: <90% RH non-condensing
Methods of operation and function setting:
1, the temperature setting:
(1), open the furnace power switch, the operator panel displays the temperature measurements 3.0.0 Temperature setpoint 2.8.0.0, plus direct use + or minus-keys to adjust the temperature setting, press the plus + or minus-button will increase or decrease one unit, long press + plus or minus-keys continuously increase or decrease the temperature set value is automatically set after long-term storage in two seconds, not switch, power influence.
(2) to open the tin stove power, the control panel displays the temperature measurements 3.0.0 Temperature setpoint 2.8.0.0., Type * use the shift key to adjust the temperature setpoint, which numbers behind the decimal point to stop in, you can use this number plus + or minus-keys to adjust. The set temperature is automatically set after long-term storage in two seconds, not switch, power influence.
2, microcomputer auto-tuning:
If the temperature measurements and temperature setpoint deviation too high (3-5 degrees), or when the temperature measurements and the actual oven temperature deviation is too high (10-20 degrees). Perform the auto-tuning operation, press and hold the shift key * three seconds thermostat will automatically enter the self-tuning state, the display and the set temperature AT, and two subtitle will not stop cross flashing, direct 20 minutes -40 minutes self-tuning at the end, only the normal display temperature you set. When self-tuning is not the end, if you want to quit and then press and hold the Shift key until the blinking stops * can be. Factory parameters is optimized values, generally do not have self-tuning.
3. temperature compensation:
If the temperature measurements and the actual oven temperature after the auto-tuning or deviation is too high, you can use the following method of correction.
(1), hold down the CAL function key for two seconds to display the temperature measurements 5c at this temperature setpoint 0.0 press + or-to compensate. Compensation is completed, press CAL function key twice to save and exit.
Example: measured temperature value than the actual oven temperature by 10 degrees, with a minus-keys to adjust to the temperature measurements 5c temperature settings -10, then press the function key CAL to save and exit. In contrast, the measured temperature value than the actual oven temperature by 10 degrees, with a plus + to adjust to the temperature measurements 5c 10 temperature settings, then press the function key CAL to save and exit.
(2) factory parameter values. Press and hold the CAL function key for two seconds, the display 5c 0.0, and then press the function key
CAL display Loc c, press the function key CAL, back to normal window, 5c that the compensation value.
Loc represents lock, unlock representation.
4 Note:
(1), self-tuning, the other parameters can not be adjusted.,
(2), self-tuning needs 20-40 minutes after the end of the auto-tuning process also needs a stable 10-20 minutes, during which time fluctuated temperatures are normal.
Payment
Shipping
Return policy
Contact us & Warranty
Working time
Payment
We accept PayPal only.
Payment must be received
within 7 business days
of auction closing.
We
ship to PayPal's address
only. Please make sure your address in EBAY can match with your shipping address on PayPal.
All major credit cards are accepted through secure payment processor PayPal.
TOTAL AMOUNT DUE includes the final auction price plus S&H (Shipping and Handling).
S&H will be determined based upon the ship to address.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
Shipping
1. Item processing time. We will ship the products within 1-5 working days upon the confirmation of your cleared payment, when buyers have some special request (e.g.Voltage, color...etc.), we may delay to ship the orders and will inform buyers about it. Do please check your message box in 1-2 days after payment is cleared. Otherwise
order may be cancelled due to insufficient of your information.
2.Shipping methods. Items are shipped out via SpeedPAK or E-packet or any other shipping method that can fit your country, we will choose the reasonable
way for you.
3. Delivery time may vary with countries and international shipping for some countries may be much slower than expected. Also your local custom may delay the shipping a lot due to the custom duty they want to charged from you for importing this item from other countries.
Note: Any Import or export duties and the cost of dispatching for remote areas, will be borne by the buyer, because it is difficult to know all country's custom duty or remote area before shipping the item.
4. Please Note
buyers from some of the countries may need to contact us
before making payment.You may be requested to pay extra shipping cost charged by shipping company otherwise order may be cancelled automatically due to insufficient payment for shipping. We need to revise your invoice before your payment please...
Return policy
(1) Taking photos and sending it via eBay Message Box.
Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box.
(2) How we will react? We will investigate the case and may send you the missing item or replacement or refund upon the situation of the case. (sometimes you may be requested to return the incorrect item).Or if it is not seller's error, buyer may need to cover the returning cost.
(3) Valid time for returning. Please contact us within 7 days upon receiving the package.All items must be returned within 30 days of purchasing the item.
Contact us & Warranty
Warranty: 3-24 months warranty is provided to our products. The length of the warranty depends on the nature of the products. Please contact us if you are wondering about how the warranty works for your item.
Contact: Do please contact us before leaving any negative feedback or Opening any kind of case. We promise to achieve your 100% satisfaction. But negative feedback actually can not solve any problem. Thank you so much for your kindness and understanding.
Working time
Beijing time :AM 8:00 -PM 8: 00