Solder Pot Bath CM380A 250W Lead-Free Titanium Alloy Soldering Irons 80mm 110V

Description

Brand NEW LEAD-FREE SOLDERING POT 250W CM380A-110V
This equipment is not constructed for classified (hazardous) environment. It can’t be used where it will be exposed to ignitable or corrosive
materials and gases.
SECTION 1. General Description
Our Lead-free soldering pot is a new design product can be heated empty, make it more safe. It’s a good tool for electronic fields.
SECTION 2. Features
1. The pot made of high precision stainless steel, with good heat exchange;
2. Nonpolar adjusting knob easy to use;
3. Can be heated empty even without tin in it;
4. The heater will occur little smoke when you use for the first time.
SECTION 3. Specifications
Working voltage: AC110V        Working temperature: 0-55
℃
Pot material: Stainless steel             Temperature warp:
±
10
℃
Temperature range: room temperature 896
°
F
(4
80
℃
)
Power:
250W
Pot size (mm):
Φ80mm
x40mm
Tin Capacity:
800g
SECTION 4. Operation
Turn on the switch and turn the knob to the scale of 6-8, (be sure there’s tin in the pot before turn on the power), after the pot is enough high, then turn back the
knob to the small scale, then it will sostenuto and make it constant temperature.
After stop working, please turn off the switch, if you won’t use it for long time, please pull out the plug.
It’s easy to operate and control, but it must be take care to use it, avoid scald.
Notes:
Before checking the inside of the pot or replacing parts, be sure to disconnect the power plug. Failure to do so may result in electric shock.