Solder Pot Bath Lead-Free Titanium Alloy Round Soldering Irons 36mm CM360 100W

Description

Introduction: Rated power: 150W Temperature range: 50-480℃ Melting tin volume: 0.3kg Frequency: 50-60Hz (mm) Tin pot diameter: 36 1. Working voltage: AC220±10V (110V can be customized) 2. Working temperature: 0-55 degrees 3. Working temperature: <90%RH non-condensing
Store category
Sign Up Now !
You may also like
Solder Pot Bath Lead-Free Titanium Alloy Round Soldering Irons 36mm CM360 100W
Product Description
Introduction:
Rated power: 150W
Temperature range: 50-480℃
Melting tin volume: 0.3kg
Frequency: 50-60Hz (mm)
Tin pot diameter: 36
1. Working voltage: AC220±10V (110V can be customized)
2. Working temperature: 0-55 degrees
3. Working temperature: <90%RH non-condensing
Operation method and function setting:
1. Temperature setting:
(1) Turn on the power switch of the furnace, the operation panel displays the temperature measurement value 3.0.0, the temperature set point 2.8.0.0, and directly use the + or minus-key to adjust the temperature setting, press the plus + or minus-key to increase or Decrease by one unit, long press the + or minus-key to continuously increase or decrease, the temperature setting value will be automatically set after long-term storage for two seconds, and is not affected by the switch or power supply.
(2) Turn on the power supply of the tin furnace, and the control panel displays the temperature measurement value 3.0.0 and the temperature set point 2.8.0.0. , Type * and use the Shift key to adjust the temperature set point, the number after the decimal point stops at this position, you can use this number plus + or minus-key to adjust. After long-term storage, the power will automatically affect the set temperature for two seconds (rather than switching).
2. Microcomputer automatic tuning:
If the deviation between the temperature measurement value and the temperature setting value is too high (3-5 degrees), or the temperature measurement value and the actual oven temperature deviation is too high (10-20 degrees). Perform automatic tuning operation, press and hold the Shift key* for three seconds, the thermostat will automatically enter the self-tuning state, the display screen and the set temperature are AT, and the two subtitles will not stop flashing crosswise, and you can take a 20-40 minute selfie- When adjusting, only adjust the normal display temperature you set. When the auto-tuning has not ended, if you want to exit, then press and hold the Shift key until the flashing stops*. The factory parameters are optimized values and generally do not have self-tuning.
3. Temperature compensation:
If the temperature measurement value and the actual oven temperature after automatic adjustment or deviation are too high, the following correction methods can be used.
(1) Press and hold the CAL function key for 2 seconds, the temperature measurement 5c is displayed on the temperature set point 0.0, and press + or-to compensate. After the compensation is completed, press the CAL function key twice to save and exit.
Example: The measured temperature value is 10 degrees higher than the actual temperature of the oven. Use the minus sign-key to adjust the temperature measurement value to 5c temperature setting -10, and then press the function key CAL to save and exit. On the contrary, the measured temperature value is 10 degrees higher than the actual temperature of the oven. Use the plus sign + to adjust the temperature to 5c to measure 10 temperature settings, and then press the function key CAL to save and exit.
(2) Factory parameter value. Press and hold the CAL function key for two seconds to display 5c 0.0, then press the function key
CAL displays Loc c, press the function key CAL to return to the normal window, 5c represents the compensation value.
Loc means locked, unlock means.
4 Note:
(1) Self-tuning, other parameters cannot be adjusted. ,
(2) The auto-tuning needs 20-40 minutes, and it also needs a stable 10-20 minutes after the end of the auto-tuning process. Temperature fluctuations during this period are normal.
Payment
Shipping
Return policy
Contact us & Warranty
Working time
Payment
We accept PayPal only.
Payment must be received
within 7 business days
of auction closing.
We
ship to PayPal's address
only. Please make sure your address in EBAY can match with your shipping address on PayPal.
All major credit cards are accepted through secure payment processor PayPal.
TOTAL AMOUNT DUE includes the final auction price plus S&H (Shipping and Handling).
S&H will be determined based upon the ship to address.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
Shipping
1. Item processing time. We will ship the products within 1-5 working days upon the confirmation of your cleared payment, when buyers have some special request (e.g.Voltage, color...etc.), we may delay to ship the orders and will inform buyers about it. Do please check your message box in 1-2 days after payment is cleared. Otherwise
order may be cancelled due to insufficient of your information.
2.Shipping methods. Items are shipped out via SpeedPAK or E-packet or any other shipping method that can fit your country, we will choose the reasonable
way for you.
3. Delivery time may vary with countries and international shipping for some countries may be much slower than expected. Also your local custom may delay the shipping a lot due to the custom duty they want to charged from you for importing this item from other countries.
Note: Any Import or export duties and the cost of dispatching for remote areas, will be borne by the buyer, because it is difficult to know all country's custom duty or remote area before shipping the item.
4. Please Note
buyers from some of the countries may need to contact us
before making payment.You may be requested to pay extra shipping cost charged by shipping company otherwise order may be cancelled automatically due to insufficient payment for shipping. We need to revise your invoice before your payment please...
Return policy
(1) Taking photos and sending it via eBay Message Box.
Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box.
(2) How we will react? We will investigate the case and may send you the missing item or replacement or refund upon the situation of the case. (sometimes you may be requested to return the incorrect item).Or if it is not seller's error, buyer may need to cover the returning cost.
(3) Valid time for returning. Please contact us within 7 days upon receiving the package.All items must be returned within 30 days of purchasing the item.
Contact us & Warranty
Warranty: 3-24 months warranty is provided to our products. The length of the warranty depends on the nature of the products. Please contact us if you are wondering about how the warranty works for your item.
Contact: Do please contact us before leaving any negative feedback or Opening any kind of case. We promise to achieve your 100% satisfaction. But negative feedback actually can not solve any problem. Thank you so much for your kindness and understanding.
Working time
Beijing time :AM 8:00 -PM 8: 00