SOLDER POT W /14# SN100C TIN SOLDER.1200 WATTS 110-220 VAC CM-181 WITH EXTRAS

Description

THIS POT FULL OF ROHS SOLDER
IS VIRTUALLY LIKE NEW WITH VERY FEW SIGNS OF USE. IT IS READY TO PLUG-IN AND USE FOR YEARS. PLEASE SEE ALL PHOTOS.
IT IS BEING SOLD BECAUSE I AM RETIRING AFTER OVER 50 YEARS IN ELECTRONICS.
THIS TYPE CM-181 POT IS BEING SOLD WITH THE FOLLOWING EXTRAS:
3/4 POUND OF SN100C BAR SOLDER, STAINLESS STEEL DROSS SKIMMER, TWO TONGS, FOR HOLDING BOARDS AND A "K" TYPE 2 CHANNEL DIGITAL THERMOMETER TYPE 6802II (UN-BRANDED) WITH ONE "K" TYPE PROBE USEFUL FOR TRACKING AND DOUBLE CHECKING TEMPERATURE OF SOLDER BATH. SEE PHOTOS..
SOLDER MELTING POT, 1200 WATTS, 110-220 VOLTS AC, MODEL CM-181, 32-1112 DEG. F (0-600 DEG. C)
OVERALL CASE DIMENSIONS 17.5"X 9.2"X 5.25" INCLUDING FEET..
TITANIUM CRUCIBLE (SOLDER POT) 180mm x 140mm x 45 mm DEEP (7.0" X 5.5" X 1.77" DEEP).
DIGITAL PID TEMPERATURE CONTROL. POT RETAINS TEMPERATURE SETTINGS WHEN OFF.
POT HAS BEEN RUN APPROXIMATELY 20 HOURS FOR A FEW SMALL BATCHES OF BOARDS ALL ROHS (TIN ONLY)
SOLDER USED HAS BEEN SN100C FROM FCT ASSEMBLY (NIHON USA LICENSEE) AND KESTER K100LD. (THEY ARE VIRTUALLY THE SAME).
POT IS BEING SOLD WITH  ABOUT 14 POUNDS OF LEAD FREE SOLDER INSIDE ( APPROX.1 cm FROM TOP OF POT) OVERALL   (BARS SELL CURRENTLY AT ABOUT .00 / POUND ON eBay AND .00 / POUND AT NATIONAL DISTRIBUTORS).
A  READABLE PHOTOCOPY OF THE INSTRUCTIONS COMPLETE WITH PID TUNING INSTRUCTIONS IS INCLUDED.
WE PACK AND SHIP VERY CAREFULLY AND ALTHOUGH HEAVY AND AT THE SAME TIME FRAGILE, YOUR PURCHASE WILL ARRIVE SAFELY.