Square Tempering Tin Furnace Stainless Steel Tin Bubble Line Furnace CM-280s

Description

35258
CM-280S Lead-free Double digital Solder Pot
Soldering Desoldering Bath 280*200*45mm  2000W
Picture showing:
Description:
Power :2000W
Temperature range :0-400 Celsius degree
Melting tin quantity :22.2kg
Extemal dimension :536*285*120mm
Tin pot size :280*200*45mm
Packing weight: 8kg
Matters needing attention:
Molten tin stove work must be placed in a smooth, heat-resistant work of Taiwanese businessmen, avoid high temperature from tin tin pan spatter.Molten tin and tin stove temperature is higher, careful work, beware of burns.
Tin stove in use for the first time, please don't burn empty tin pan to tin oxide too fast, please add small tin or partially molten tin in order to keep the heat transfer in a timely manner.
Tin unleaded melting furnace work must be separated from lead tin stove placed everything (including lead), to prevent lead pollution, make the lead-free tin lead, tin, lead to the unqualified products.The company serious statement, if you have such things happen, the company does not undertake any responsibility.
In the vicinity of flammable gas and combustible and explosive items shall be forbidden to use molten tin furnace.
When moving molten tin stove, must cut off power supply first, stay tin furnace cooling to room temperature.
This product is a high temperature equipment, remember to cut off the power when not in use, in order to avoid accidents.
For safety and service life of tin furnace, tin furnace continuous work not more than 12 hours.
For the sake of personal safety and the machine can work normally, remember not to burn, empty when used to connect with the power of the "ground" is used, at the same time pay attention to the "ground" do not pick up on the "zero".
The company of molten tin furnace furnace adopts refined from TAI titanium material imported from Japan, after high temperature calcination time tin pan pan body surface will become golden yellow or blue, it belongs to the normal phenomenon, is also the material properties of the metal this.
The product quality guarantee is all use this brand in all parts under the condition of original accessories, otherwise the quality is not guarantee.
Customer in use, boiled acid, alkali, under the condition of strong corrosive materials such as tin slag, tin pan and heating element is not warranty.
This tin stove are not waterproof products, note moistureproof in use.
the performance characteristics:
1, Cm series lead-free solder furnace configuration power heater, can quickly dissolve lead-free solder bar, from room temperature to 450 degree centigrade  just 25 minutes (depending on the size of the stove there will be slight difference).
2, by microcomputer chip intelligent control, double digital display, intuitive, clear heat sensitivity, quickly back to the temperature, temperature compensation.
3, unleaded tin pan imported titanium material, high temperature resistance, corrosion resistance, resistance to wear and durable.
4, the tin furnace set direct input data using touch buttons, simple and accurate.
5, machine set, the data can be preserved for a long shutdown, power cuts.
Three, working environment:
1, working voltage: AC220 plus or minus 10 v (110 v) can be customized
2, working temperature: 0-55 degrees
3, working temperature: < 90% RH without condensation