StewMac 3/8" Conversion Tuner Bushings, Hex, nickel, set of 6

Description

Our 3/8" Conversion Guitar Tuner Bushings are for adapting 1/4" string posts to fit larger pegholes
Made of high quality machined brass
Our special tapered knurled press-fit brass bushings let you install Waverly or other tuning machines with 1/4"-diameter string posts into 3/8" or 10mm pegholes
Each bushing has an outside diameter of .394" (10.01mm), that tapers down to .375" (9.53mm); hex collar has an outside diameter of .466" (11.84mm)
Sold as a set of 6 nickel bushings
Our
3/8" Conversion Guitar Tuner Bushings
come in round and hex shape bushings for adapting 1/4" string posts to fit larger pegholes. Set of 6.
Adapts a 1/4" string post to fit larger pegholes.
Our special tapered knurled press-fit brass bushings let you install Waverly or other tuning machines with 1/4"-diameter string posts into 3/8" or 10mm pegholes (such as those used for Gotoh/Grover/Schaller tuners) without the need to plug and redrill the pegholes.
For a perfect fit, we recommend a .393" diameter reamer to cut a clean, accurate counterbore.
Note:
these conversions bushings will NOT work on instruments with 10.5mm pegholes. Measure the tuner peghole diameter prior to ordering.
Specs for our hex shape 3/8" conversion bushings:
Outside diameter at top of taper: 0.394" (10.01mm)
Outside diameter at bottom of taper: 0.375" (9.53mm)
Hex-shaped collar diameter: 0.466" (11.84mm)
Sold as a set of 6 nickel bushings.