-40%
Used 110V Solder pot Tin melting fast Soldering Desoldering Bath Practical
$ 18.05
- Description
- Size Guide
Description
Used Solder Pot Soldering Desoldering Bath Titanium Plate 100mm 110V 300W300-350℃
Its electronic temperature adjusting board is produced by imported components party,which may choose the temperature according to the request.
It is convenient for using and maintaince,and it has good thermal reaction,quick soldering.
When firstly using,it is normal if the electric heating core has few smoke.
Using Notice
1) Before using,be sure the power must supply with “ground wire”,working without that is banned.
2) Adjusting the knob in the high-end at the beginning,until the tin melt transferred back to the tin water temperature is not too high since the required temperature profile,tin water temperature of 300-350℃,otherwise cause aging people to engage in tin pot,tin water black or yellow,acidic flux,tin pot in the ultra-high temperature effect will be faster corrosion perforation leakage tin.Must be turn off the power before youo leave,in order to avoid accidents.
Parameters
Model
cm310
Voltage
110v
Power
300w
Melting tin quantity
1200g (2.65lbs)
Melt tin time
About 8 minutes
Tin pot diameter
100mm (3.94")
On May-10-21 at 01:09:52 PDT, seller added the following information: